Solved: Cisco works & Red Color on the access switch???

alsayed · ‎04-09-2007

Hi Experts

i have seen on my Cisco works an access switch has a read Color + ? on the image of this switch

what this does?

rergards

ALI

Amit Singh · ‎04-09-2007

Ali,

Please find another link for device support on Cisco works with the required minimum IOS on the devices.This will come handy :

http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_device_support_table09186a00802beaa7.html#wp280829

-amit singh

View solution in original post

Amit Singh · ‎04-09-2007

Ali,

The red color means that the device is unreachable by SNMP.Thsi could be due to incorrect SNMP community strings or SNMP timeouts. Please see the link below for the reasons and workaround for settings:

http://www.cisco.com/warp/customer/477/Campus/com_cwsi_4_top10.html#qa2

HTH,Please rate if it does.

-amit singh

alsayed · ‎04-09-2007

HI amit!

PLZ GIVE Me another one for Public;what is explanation of the question Mark on the switch image?how can i fix it?

10xs Ali

Amit Singh · ‎04-09-2007

Ali,

You should be able to access it now.

http://www.cisco.com/warp/public/477/Campus/com_cwsi_4_top10.html#qa2

-amit singh

Amit Singh · ‎04-09-2007

Ali,

Please find another link for device support on Cisco works with the required minimum IOS on the devices.This will come handy :

http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_device_support_table09186a00802beaa7.html#wp280829

-amit singh

alsayed · ‎04-09-2007

Amit My Freind;10xs a lot for yr reply

Regards

Ali