Verifying Radio model in AP

Answered Question
Apr 9th, 2007
User Badges:

Hi guys, just one quick question: Is there a way to see the APs radio models from the CLI? Because im trying to see if the radios are compatible with LWAPP. I know that with the convertion tool the job can be done, but I want to know for sure before atempting to do the convertion.


thanks in advance!

Correct Answer by Rob Huffman about 10 years 2 months ago

Hi Omar,


I believe the command 'show controllers' should do the trick.


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Mon, 04/09/2007 - 09:26
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Omar,


I believe the command 'show controllers' should do the trick.


Hope this helps!

Rob

b.julin Mon, 04/09/2007 - 13:06
User Badges:
  • Bronze, 100 points or more


The conversion tool does it this way:


show controller | include Radio AIR


The strings it accepts are "AIR-" followed by RM21A, RM22A, AP1131A, AP1131G, MP21G or MP31G (on the 1240 or 1250, the other units it does no check for radio type presumably because they are all supported/integrated)




Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode