Solved: Verifying Radio model in AP

omarmontes · ‎04-09-2007

Hi guys, just one quick question: Is there a way to see the APs radio models from the CLI? Because im trying to see if the radios are compatible with LWAPP. I know that with the convertion tool the job can be done, but I want to know for sure before atempting to do the convertion.

thanks in advance!

Rob Huffman · ‎04-09-2007

Hi Omar,

I believe the command 'show controllers' should do the trick.

Hope this helps!

Rob

View solution in original post

Rob Huffman · ‎04-09-2007

Hi Omar,

I believe the command 'show controllers' should do the trick.

Hope this helps!

Rob

omarmontes · ‎04-09-2007

Thanks! problem solved

b.julin · ‎04-09-2007

The conversion tool does it this way:

show controller | include Radio AIR

The strings it accepts are "AIR-" followed by RM21A, RM22A, AP1131A, AP1131G, MP21G or MP31G (on the 1240 or 1250, the other units it does no check for radio type presumably because they are all supported/integrated)