Steven van Jaarsveld Tue, 04/10/2007 - 00:37
User Badges:

Hi

You first need to download the LAP code and the LAP Upgrade Tool from Cisco's website. Once done, you then create a .txt file with the information of the AP (IP Address, Username, Password, Enable Password) and insert it into the tool. The Tool has a built in TFTP Server and if pointed to the correct directory (where the LAP Code is) it will upgrade the AP automatically for you.

All Done!!

Cheers

Steven

Steven van Jaarsveld Tue, 04/10/2007 - 01:04
User Badges:

Hi Ricardo

I did some checking as well. Unfortunately the 1230B is not supported on the LWAPP Upgrade.

You will need to upgrade the hardware.


Cheers

Steven

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode