Upgrade AP to LAP

ricardorojas123 · ‎04-09-2007

Hi, I have the AP, AIR-AP1230B-A-K9, and I need upgrade it, so that it works like a LAP, How I do it?

Steven van Jaarsveld · ‎04-10-2007

Hi

You first need to download the LAP code and the LAP Upgrade Tool from Cisco's website. Once done, you then create a .txt file with the information of the AP (IP Address, Username, Password, Enable Password) and insert it into the tool. The Tool has a built in TFTP Server and if pointed to the correct directory (where the LAP Code is) it will upgrade the AP automatically for you.

All Done!!

Cheers

Steven

Steven van Jaarsveld · ‎04-10-2007

Hi Ricardo

I did some checking as well. Unfortunately the 1230B is not supported on the LWAPP Upgrade.

You will need to upgrade the hardware.

Cheers

Steven