I have a Catalyst 4006 with Supervisor 2 WS-X4013+
I want to create more than 200 VLANs on the switch, with as many STP instance.
Is it possible with this Supervisor Card?
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 01-Nov-04 16:23 by kellythw
Image text-base: 0x00000000, data-base: 0x010BAF04
Dagobah Revision 90, Swamp Revision 3
HDD_Sw uptime is 30 weeks, 5 days, 23 hours, 55 minutes
System returned to ROM by reload
System restarted at 16:37:24 GMT+1 Fri Sep 1 2006
System image file is "bootflash:"
cisco WS-C4006 (MPC8245) processor (revision 4) with 262144K bytes of memory.
Processor board ID FOX063610MX
Last reset from Reload
2 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
26 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Please paste the show mod output.
If its Sup2+ running IOS, then yes you can configure that. Sup2+ supports 2K active vlans with 1.5K STP instances.
HTH,Please rate if it does.