04-10-2007 07:38 AM - edited 03-05-2019 03:23 PM
Hi,
I have a Catalyst 4006 with Supervisor 2 WS-X4013+
I want to create more than 200 VLANs on the switch, with as many STP instance.
Is it possible with this Supervisor Card?
Thanks
Regards
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 01-Nov-04 16:23 by kellythw
Image text-base: 0x00000000, data-base: 0x010BAF04
ROM: 12.1(20r)EW1
Dagobah Revision 90, Swamp Revision 3
HDD_Sw uptime is 30 weeks, 5 days, 23 hours, 55 minutes
System returned to ROM by reload
System restarted at 16:37:24 GMT+1 Fri Sep 1 2006
System image file is "bootflash:"
cisco WS-C4006 (MPC8245) processor (revision 4) with 262144K bytes of memory.
Processor board ID FOX063610MX
Last reset from Reload
2 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
26 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Solved! Go to Solution.
04-10-2007 09:45 AM
Please paste the show mod output.
If its Sup2+ running IOS, then yes you can configure that. Sup2+ supports 2K active vlans with 1.5K STP instances.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet09186a0080197424.html
HTH,Please rate if it does.
-amit singh
04-10-2007 09:45 AM
Please paste the show mod output.
If its Sup2+ running IOS, then yes you can configure that. Sup2+ supports 2K active vlans with 1.5K STP instances.
http://www.cisco.com/en/US/products/hw/switches/ps4324/products_data_sheet09186a0080197424.html
HTH,Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide