Hello Jpcama,

but i am not able to see the actual disk space,

i am trying to change in the queue size ( i have increased spam quarantine from 2 gb to 5fb), however nothing change in the status deails

Hello Daniel,

you cannot change any queues, but probably I got that statement wrong, the only indicators for disk usage are those two:

cli: status detail 

cli: quarantineconfig

In case you are looking for partition sizes etc, that's unfortunately not available in AsyncOS.

Cheers,

Andreas

Try :

>ipcheck

Regards,

Valter

On 6/12/12 3:00 PM, "bechara.abourahal@bmbgroup.com"

didnt work

Perhaps you can share the output for the command ipcheck.

You should get an output like:

esalab.cisco.com> ipcheck

  Ipcheck Rev           1

  Date                  Mon Jun 18 10:43:20 2012

  Model                 C150

  Platform               (8066)

  MGA Version           Version: 7.5.2-014

  Build Date            2012-03-06

  Install Date          2012-05-03 08:36:10

  Burn-in Date          Unknown

  Serial No.            001D09F09F6B-7xxxxx1

  BIOS Version          A02I

  RAID Version          02

  RAID Status           READY

  RAID Type             1

  RAID Chunk            Unknown

  BMC Version           1.70

  Disk 0               

  Disk 1               

  Disk 2               

  Disk 3               

  Disk 4                233GB Seagate ST3250620NS 3BKH at ata2-master SATA300

  Disk 5               

  Disk 6                233GB Seagate ST3250620NS 3BKH at ata3-master SATA300

  Disk 7               

  Disk Total            466GB

  Root                  400MB 43%

  Nextroot              400MB 42%

  Var                   400MB 0%

  Log                   54GB 16%

  DB                    2GB 0%

  Swap                  6GB

  Mail Queue            10GB

  RAM 1 A               512M ECC 667MHz

  RAM 1 B               512M ECC 667MHz

  RAM 2 A               512M ECC 667MHz

  RAM 2 B               512M ECC 667MHz

  RAM Total             2G

  CPU 1                 D 2G 800FSB 0.5M Cache

  PCI 1                 PCI-X 64-bit Empty

  PCI 2                 PCI-e 8x Empty

  NIC Data 1            00:xx:xx:xx:xx:6b, NetXtreme Gigabit Ethernet PCI Express (BCM5721)

  NIC Data 2            00:xx:xx:xx:xx:6c, NetXtreme Gigabit Ethernet PCI Express (BCM5721)

  PS1                   Unknown

  PS2                   Unknown

  Key                   1da, IronPort Anti-Spam

  Key                   1da, Receiving

  Key                   expire, Bounce Verification

  Key                   expire, Central Mgmt

  Key                   expire, Intelligent Multi-Scan

  Key                   expire, IronPort Email Encryption

  Key                   expire, IronPort Image Analysis

  Key                   expire, McAfee

  Key                   expire, Outbreak Filters

  Key                   expire, RSA Email Data Loss Prevention

  Key                   expire, Sophos

esalab.cisco.com>

Hi ,

I am also getting the same issue . The WSA get down daily due to disk space even the logs utilizing only 26% . Then vm admin need to add additional space , only after that the WSA get functional .

 Disk 0                1024GB VMware Virtual disk 1.0 at mpt0 bus 0 scbus2 target 0 lun 0
  Disk Total            1024GB

  Root                  2GB 31%
  Nextroot              2GB 28%
  Var                   400MB 11%
  Log                   808GB 26%
  DB                    2GB 0%
  Swap                  8GB
  Proxy Cache           200GB

  RAM Total             8192M

Please help to resolve .