Connecting 2 PBX's

Answered Question
Apr 10th, 2007
User Badges:

I have 2 older PBX's, Avaya and NEC, that I want to connect over an MPLS service. The PBX's will connect to a router via a PRI on either side but I'm not sure which ones to use. I'm considering using 2 2821's but not sure if it will do what I want. Does anyone have a recommendation?

Correct Answer by paolo bevilacqua about 10 years 2 months ago

Hi Roland,

Yes a 2821 will do this perfectly. But also the 2811, and the 2801 too! However, the latter two will require additional PVDM resources to what comes in the voice bundle (16 and 8 channels respectively)


Hope this helps, please rate all useful posts



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Tue, 04/10/2007 - 13:18
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi Roland,

Yes a 2821 will do this perfectly. But also the 2811, and the 2801 too! However, the latter two will require additional PVDM resources to what comes in the voice bundle (16 and 8 channels respectively)


Hope this helps, please rate all useful posts



paolo bevilacqua Tue, 04/10/2007 - 13:58
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Thank you for the nice rating and good luck with your project.

Actions

This Discussion