Terminate IPsec on one of the ports of HWIC-4ESW (through VLAN)

agcastle2000 · ‎04-11-2007

Hi,

It's not clear to me whether it's possible to terminate IPSec on one of the ports of HWIC-4ESW (through VLAN)? The document on the link below suggests that it supports L3 with limitations but it's short in mentioning whether IPsec is one of the limitations.

http://www.cisco.com/en/US/customer/products/ps5855/products_qanda_item0900aecd8016c026.shtml

Thanks.

Regards, Archie

aghaznavi · ‎04-17-2007

Yes, you can terminate IPSec on HWIC-4ESW .

here sample config:

interface Vlan100

description crypto int vlan

ip address 10.10.100.100 255.255.255.0

crypto map mymap

interface FastEthernet 0/0/1

description int for crypto vlan int

switchport access vlan 100

no ip address

duplex full

speed 100