Gateway problem

Unanswered Question
Apr 11th, 2007

I have a router 1600 that is at the back of a PIX 520. The router is configured to simply route all traffic to the internet thro 10.0.0.10

No traffic routes thro the router, the config is below. Does this look in order?

version 12.0

service timestamps debug uptime

service timestamps log uptime

service password-encryption

!

hostname Websense

!

!

!

ip subnet-zero

no ip routing

!

!

!

!

interface Ethernet0

ip address 10.0.0.15 255.255.255.0

no ip directed-broadcast

no ip route-cache

!

interface Ethernet1

ip address 192.168.201.254 255.255.255.0

no ip directed-broadcast

no ip route-cache

!

ip classless

ip route 0.0.0.0 0.0.0.0 Ethernet0

no ip http server

!

!

!

end

Websense#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mahmoodmkl Wed, 04/11/2007 - 23:15

Hi

First enable IP routing it is disabld.

10.0.0.10 i assume is the IP of the PIX inside interface,if its then define the default route pointing to this IP and check.

Thanks

Mahmood

stantcd Thu, 04/12/2007 - 01:02

thanks

Yes, .10 is the pix. I thought routing was already enabled. would the static route to ethernet0 for all routes not forfil this function then? Do i need the default-gateway command instead?

John

victory_cm Thu, 04/12/2007 - 02:10

No need to give Default-gateway command..Just enable IP routing..That will do.

Actions

This Discussion