attrgautam Thu, 04/12/2007 - 00:59
User Badges:
  • Silver, 250 points or more

AFAIK there is no difference in the bandwidth points offered on NPE-G2 it is the same 600 points as in the good old NPE-G1

As quoted in http://cisco.com/en/US/products/hw/modules/ps2033/products_configuration_guide_chapter09186a008014cf5c.html#wp1053970


NPE-G1 or NPE-G2

?Left side, bus 1 (slots 1, 3, and 5) and I/O controller (slot 0) has a 600 point maximum.


?Right side, bus 2 (slots 2, 4, and 6) has a 600 point maximum.


?Distribute port adapter bandwidth points evenly across both left and right system slots (buses).


?Do not calculate bandwidth points for an I/O controller if an I/O controller is installed with the NPE-G1 or NPE-G2.


?The NPE-G1 or NPE-G2 Gigabit Ethernet interfaces do not use bandwidth points.



Actions

This Discussion