Problem with routing...

Unanswered Question
Apr 12th, 2007
User Badges:

Hello,

I just installed a 6509 running ios. This 6509 connections two server irons (Foundry, switch like). On the 6509 I have multiple servers connected to it. I can ping all my networks but one. 10.7.1.x/24 (from these servers connected to the 6509). I can ping the router interface 10.7.1.254, but I cannot ping anything else. This only happens when I'm on a server on the 10.4.x.x/16 network. From the 6509 I can ping anything on the 10.7.1.x network. Any ideas why

Thanks so much.


Mike C.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Amit Singh Thu, 04/12/2007 - 05:36
User Badges:
  • Cisco Employee,

Mike,


Where are both the subnets located. On the same 6509 switch or other switch. Howz the network topology. Please attach a brief network topology and config for more understanding


HTH,

-amit singh

pciaccio Thu, 04/12/2007 - 05:42
User Badges:
  • Silver, 250 points or more

Mike:


It is a little difficult to diagnose without some sort of configuration off the 6509. However did you check your default gateways off the servers and are they correct for their respected VLAN's that they are on?

pciaccio Thu, 04/12/2007 - 09:10
User Badges:
  • Silver, 250 points or more

This problem may stem from an OSPF issue. Can you verify that your OSPF process is working. I see no area 0 in your configuration. I hope you have an area 0 in your configuration because you need it. Do a show ip route and verify your subnet routes are all there.

Actions

This Discussion