ASA multiple contexts

Unanswered Question
Apr 12th, 2007

R1 R1

\ /

SW1 (dot1Q to ASA)

|

ASA1

Configured vlan interfaces vlan121, vlan122 on the ethernet0/1 interfaces and allocated the interfaces as below, R1 and R2

ethernet addresses are from the same subnet as inside interface, I am unable to ping the inside interfaces from R1 and R2

and i see encapsulation failed when I debug, checked vlan assignments and phycial connectivity and confirmed that everthing

is fine, below are the config, any suggestions? Thanks in advance

context a - e0/1.122 (insideA),e0/0(outside) and e0/2(dmz)

context b - e0/1.121 (insideB),e0/0(outside) and e0/2(dmz)

Contxt A config

-----------------

interface insideA

nameif inside

security-level 100

ip address 136.1.0.12 255.255.255.0

!

interface dmz

nameif dmz

security-level 50

ip address 136.1.124.121 255.255.255.0

!

interface outside

nameif outside

security-level 0

ip address 136.1.123.121 255.255.255.0

context B config

----------------

interface insideB

nameif inside

security-level 100

ip address 136.1.0.12 255.255.255.0

!

interface dmz

nameif dmz

security-level 50

ip address 136.1.124.122 255.255.255.0

!

interface outside

nameif outside

security-level 0

ip address 136.1.123.122 255.255.255.0

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion