IPv6 and Switch compatibility

Unanswered Question
Collin Clark Thu, 04/12/2007 - 08:29

Looks like it's not officially supported. From the command reference on cisco.com:

"Layer 3 IP version 6 (IPv6) packets are treated as non-IP packets."


Looking at the switch matrix it looks like the 3560's are the lowest model that supports IPv6.


HTH and please rate.

Harold Ritter Thu, 04/12/2007 - 10:09

I don't see any issue to pass IPv6 traffic through the 2950. The issue is if you want to manage the 2950 via IPv6 as it is not supported.

Hope this helps,


This Discussion