RME and Netconfig Problems

Answered Question
Apr 12th, 2007
User Badges:

Im trying to run a Netconfig job and it keeps failing and giving me this error:


Message: Command(s) failed on the device

TFTP: Failed on the device. Failed to detect SSH version running on the device.


All the devices I am trying are setup with login/password/community strings in DCR and I have made sure that Telnet is specified as the first protocol to use in the settings of RME for Netconfig. Anybody offer some help as why this is failing? I have used this before with no problems, and now I cant get it to work.

Correct Answer by Joe Clarke about 10 years 1 month ago

Looks like a problem with the way you've specified the Netconfig job. Please provide the details of which template you used to deploy these changes. I'm guessing Ad Hoc or custom template, but I want to be sure.


Chances are you just need to follow the steps at http://server/help/rme/fundamentals/netcfg_MultilineCmds.html for deploying your banner configuration.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Thu, 04/12/2007 - 08:05
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Enable ConfigJob debugging under RME > Admin > System Preferences > Loglevel Settings, then re-run a job, and look at the job log under NMSROOT\files\rme\jobs\NetConfigJob\ (Windows) or /var/adm/CSCOpx/files/rme/jobs/NetConfigJob/ (Solaris) for errors. A screenshot of your Netconfig protocol order would also help.

thefindjack Thu, 04/12/2007 - 08:57
User Badges:

What file do you want me to post? There are 5 of them...?

Joe Clarke Thu, 04/12/2007 - 09:38
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

A tar or zip of the whole direcory.

Correct Answer
Joe Clarke Thu, 04/12/2007 - 11:45
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

Looks like a problem with the way you've specified the Netconfig job. Please provide the details of which template you used to deploy these changes. I'm guessing Ad Hoc or custom template, but I want to be sure.


Chances are you just need to follow the steps at http://server/help/rme/fundamentals/netcfg_MultilineCmds.html for deploying your banner configuration.

thefindjack Thu, 04/12/2007 - 12:24
User Badges:

I looked at how to enter Multi-Line commands with your link and I got it working. That is really strange that you have to do it that way, if I enter the same commands I was trying in NetConfig through configure mode on my routers it works fine. Guess you just have to specify the CLI commands differently in NetConfig. Thanks for the Help!

Actions

This Discussion