FTPS w/ CSS 11501

Unanswered Question
Apr 12th, 2007

Hi there...we have an ftp service that uses the ftps protocol (port 990 I believe) and I can't seem to get it to work behind the CSS....I get to the authentication but the data channel is not making it through...


I also think that port redirection may be causing some issues as well..


My content rule is listening on port 990, and the service rule is using port 6855 (see below for config snippets)


service blahblah:6855

ip address 161.19.6.133

protocol tcp

port 6855

keepalive port 6855

active

content webmthd_b2b_ftps_dev

vip address 161.19.6.28

port 990

protocol tcp

add service blahblah:6855

active




Any thoughts, suggestions, or advice would be greatly appreciated.


Thanks in advance!


These forums are the most useful learning and troubleshooting tool I have ever used! Keep up the good work...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Syed Iftekhar Ahmed Thu, 04/12/2007 - 09:42

Try the following



Group ftp

VIP address 161.19.6.28

Add service blahblah:6855

Active


content webmthd_b2b_ftps_dev

vip address 161.19.6.28

Application ftp-control

port 990

protocol tcp

add service blahblah:6855

active



Syed Iftekhar Ahmed

yycsandman007 Thu, 04/12/2007 - 11:19

Thanks man....I will try it this evening...I have a change ticket scheduled for then....will post results here tomorrow.


Thanks again!


Sandman

Actions

This Discussion