Serial Interface VoIP/RTP QoS

Unanswered Question
Apr 12th, 2007
User Badges:

Hi there,


I'm wanting to setup some sort of VoIP/RTP QoS on a 2MB link between a satellite site and HQ. I have approx 20 handsets at the remote site. I have setup the following QoS rules on both remote and HQ routers, 2620's with IOS 12.2.


Router-HQ#sh run

call rsvp-sync

controller E1 1/0

!

class-map match-all class1

match access-group 101

!

policy-map policy1

class class1

bandwidth 2048

random-detect

random-detect precedence 0 32 256 100

!

interface Serial0/0

bandwidth 2048

encapsulation ppp

ip tcp header-compression iphc-format

ip rtp header-compression iphc-format

ip rtp compression-connections 64

ip rtp reserve 16384 100 800

!

Router-HQ#


I am trying to implement a more aggressive queue QoS method than just ip rtp header-compression?


Does anyone have any recommendations regarding my bodged attempt??


Much appreciated, Cheers!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Brandon Buffin Fri, 04/13/2007 - 09:41
User Badges:
  • Purple, 4500 points or more

Take a look at the QoS SRND.


QoS SRND

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns432/c649/ccmigration_09186a008049b062.pdf


Specifically, look at the following sections.


WAN Aggregator QoS Design -> WAN Edge Classification and Provisioning Models


WAN Edge Link Specific QoS Design -> Frame Relay -> High-Speed


This should help you with classifying and prioritizing traffic.


Hope this helps. If so, please rate the post.


Brandon

chrispresland Tue, 04/17/2007 - 02:32
User Badges:

Hi Brandon,


Apologies for the late reply!


Thanks for your input and guidance. I shall be applying some new configuration soon so will let you know how it turns goes!


Best Regards,


Chris

Actions

This Discussion