Match DSP Calculator Configuration with CCME

Unanswered Question
Apr 12th, 2007
User Badges:

Hello everybody...

I`m already configuring a CCME 2801 and I`ve had troubles to match the DSP Calculator Configuration with my router configuration. I have a troubles with the association of dspfarm profile for mtp and conferencing. They shows all the time a "registered status" but never active. The only dspfarm profile Working (active) is the dspfarm profile for transcode.

The issue here is that i never see the dspfarm working for conferencing and mtp.

This is the DSP Calculator Configuration:

sccp local <local interface>

sccp ccm <call manager IP address> identifier <ccm ID #> version <version #>



sccp ccm group 999

bind interface <local interface>

associate cme <cme ID #> priority 1

associate profile <conferencing profile ID #> register <conference bridge name>

associate profile <transcoding profile ID #> register <transcoder name>


dspfarm profile <transcoding profile ID #> mtp

maximum sessions hardware 2

associate application SCCP

dspfarm profile <transcoding profile ID #> transcode

maximum sessions 2

associate application SCCP

dspfarm profile <conferencing profile ID #> conference

maximum sessions 6

associate application SCCP

I`m already using on board PVDM.

Any suggestion?

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
wangdhb987 Sun, 04/15/2007 - 01:27
User Badges:

I have same question.

HD-2V need to be similar to the Card? Onboard the PVDM not?


This Discussion