Password Recovery WLC4402

Answered Question
Apr 12th, 2007
User Badges:

How I can recover the password in a Wireless Lan Controllers 4402?

Correct Answer by irisrios about 9 years 11 months ago

There is no password recovery option on the Wireless LAN Controller (WLC). You need to set the WLC to factory defaults and reconfigure it.


In order to set the WLC to factory defaults, power cycle the WLC, press ESC Key during the boot up process from the console and select last option(5) to clear the configuration and reboot the Wireless Lan Controller.


Note:The new default username and password is "admin".


http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cc09.html#wp1046716


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
irisrios Thu, 04/19/2007 - 05:41
User Badges:
  • Silver, 250 points or more

There is no password recovery option on the Wireless LAN Controller (WLC). You need to set the WLC to factory defaults and reconfigure it.


In order to set the WLC to factory defaults, power cycle the WLC, press ESC Key during the boot up process from the console and select last option(5) to clear the configuration and reboot the Wireless Lan Controller.


Note:The new default username and password is "admin".


http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cc09.html#wp1046716


Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode