04-13-2007 01:21 AM - edited 03-13-2019 04:04 PM
I have a cme lab setup with several types of phones 7912's, 7960's and a 7970, all the phones except the 7970 show the correct time, the 7970 is still one hour behind even though I have applied the latest firmware which had the dst fix to it, I have tried resetting the phone, reloading the router, resetting the clock and updating calendar on the router, removing telephony services from the router and reloading then running telephony services setup again, I have tried downloaded the firmware to earlier versions and back to latest version still no joy.
Anyone still having these time issues ?
12.4(11)T / CME 4.0(2)
Gui 4.0.3.1a
7970 Firmware version SCCP70.8-0-4SR2S
Thanks
Solved! Go to Solution.
04-13-2007 01:22 AM
Have you also set the correct time-zone under telephony-service?
If not, set that and do a create cnf-files.
Regards
Aaron
Please rate helpful posts..
04-13-2007 01:22 AM
Have you also set the correct time-zone under telephony-service?
If not, set that and do a create cnf-files.
Regards
Aaron
Please rate helpful posts..
04-13-2007 01:43 AM
Thanks Aaron did the trick, removed telephony services that many times during lab testing must of forgot to put the timezone back on at some point.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: