dynamic virtual tunnel interface on 2821

Unanswered Question
Apr 13th, 2007

Hi all.

I have a 2821 with software 12.4(9)T1 advanced ip services.

I tried to configure a dynamic virtual tunnel interface to terminate VPN client ipsec sessions.

Reading documentation, it says to configure

interface virtual-template <number>

tunnel mode <mode>

But router does not accept "tunnel" command on interface configuration.

This feature seems supported by this software release.

Any hint?

Thank you in advance.

denis

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
forestalcompany Mon, 06/18/2007 - 13:45

when declaring the virtual template you need specify the mode as follows:

int virtual-template <1-200> type tunnel

then you may issue the subsequent tunnel subcommands

hope this helps!

cineca Mon, 06/18/2007 - 23:36

Hi, I forgot I had this open!

I solved the problem upgrading the image.

Documentation, at least what I found, states this feature is supported on 12.4(9)T1 but I really can't agree.

You'll need a 12.4(11)T1 or higher.

Thank you all.

Actions

This Discussion