04-13-2007 04:41 AM - edited 03-03-2019 04:32 PM
Hi,
I'm building a lab at work and I'm hoping to score 2x 3825. However, I'd like at least one of them to have the cards necessary so I could replace a production 3725 incase I need to.
The 3725 is running:
(C3725-ADVIPSERVICESK9-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
and has the following interfaces:
Cisco 3725 (R7000) processor (revision 0.1) with 196608K/65536K bytes of memory.
Processor board ID JMX0727L060
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
2 FastEthernet interfaces
1 Serial interface
1 HSSI interface
2 Channelized T1/PRI ports
DRAM configuration is 64 bits wide with parity disabled.
55K bytes of NVRAM.
62592K bytes of ATA System CompactFlash (Read/Write)
62720K bytes of ATA Slot0 CompactFlash (Read/Write)
What cards and license would I need for the 3825 to replace this?
Thanks!
Solved! Go to Solution.
04-13-2007 04:53 AM
Hi, a wic-1t, nm-hssi or t3, and vwic or vwic2 will do.
Hope this helps, if please rate post!
04-13-2007 04:53 AM
Hi, a wic-1t, nm-hssi or t3, and vwic or vwic2 will do.
Hope this helps, if please rate post!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: