problem with EzVPN server and Cisco VPN Client

Unanswered Question
Apr 13th, 2007
User Badges:


I have a problem with EzVPN. Ii cannot establish an IPSec tunnel between an Sever (2811) and Cisco VPN Client 4.6.

the network diagram, router config and the output debug for the client are attached with the message.

I think that it's a problem with NAT because the outside interface of the router is configured with a private IP address of the ISP (not routable) witch forward traffic to our Network via a pool of public addresses.

I used the same config fond on cisco web site:

but i it didn't work.

Help me please to solve this problem.

Thank you in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion