Cisco 1231 not associating client PCs

Unanswered Question
Apr 14th, 2007

Hi all,

I have a cisco 1231 AP that has 2 SSIDs/VLANS on it.

I am trying to test and even with my laptop with wireless card 2 feet away from the AP, it never trys to associate it.

1 vlan is PSK

Other vlan is Radius WPA

I have been debuging radius and dont see ANYTHING. No attemps no failures. It's like the AP doesn't even know I'm there and or it's ignoring me. :(

I have verified all interfaces are open.

Any and all ideas to help troubleshoot this would be helpful!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
scottmac Sat, 04/14/2007 - 05:58

Make sure the SSIDs are exactly the same (including capitalization and leading / trailing spaces)

Otherwise, post your (sanitized) AP config.


swoodyard Sat, 04/14/2007 - 06:32


Thanks for the help.

SSIDs are exactly the same as in my client.

I can't even see the SSIDs in my 'scan networks' in my client with the AP 6 inches away.

How can I braodcast my SSIDs just to test?


Vlan 64 = management

Vlan 80 = employee

vlan 160 = guest

Sanitized config attached...


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode