Paolo Bevilacqua Sun, 04/15/2007 - 01:24

Hi,


You need:

voice register global

authenticate realm


voice register dn 17

number 2017

voice register pool 17

id mac 0000.0000.0000

number 1 dn 17

dtmf-relay rtp-nte

username password


Set username, password and realm in the phone. The phone must attempt to register the same number as in "voice register dn".


Hope this helps, if so please rate post!


sandeep pokhriyal Sun, 04/15/2007 - 05:30

hi,i hae got one X-lite phone.

this is what i confiugred .

!

voice register global

max-dn 192

max-pool 48

authenticate realm cisco

!

voice register dn 100

number 1000

!

voice register pool 48

id mac 000A.E434.5C00

number 1 dn 100

dtmf-relay rtp-nte

!




and what is this username and password ??in which command promt u have to enter this as router is not accepting it except at config mode

Paolo Bevilacqua Sun, 04/15/2007 - 08:00

Which IOS version are you using?

Username and password are entered in "voice register pool" mode. The mac you enter does not matter, you can put anything.

Paolo Bevilacqua Sun, 04/15/2007 - 12:08

So username is supported in your IOS. I suggest to configure username same as registering number in the (soft)phone, to simplify the configuration.


Hope this helps, if so please rate post!

sandeep pokhriyal Mon, 04/16/2007 - 04:25

hi now i made all parameters same.


voice register global

max-dn 192

max-pool 48

!

voice register dn 100

number 100

!

voice register pool 48

id mac 000A.E434.5CD0

number 1 dn 100

dtmf-relay rtp-nte

!



also when i am giving username 100 password 100

its coming out of "voice-register-pool" mode.


without giving any error and goin to config mode.


i am using x-lite sip softphone as it is free to download.

Paolo Bevilacqua Mon, 04/16/2007 - 05:09

Hi,


This is very strange. Under "voice register pool", with the same IOS, I can configure:


ccme(config-register-pool)#?

voice register pool configuration commands:

after-hour After-hours call blocking

alias Associate alias pattern

application Define application

blf-speed-dial Define BLF speed dial ip-phone button

call-waiting Enable the call-waiting option for SIP phone

check-version send check-version msg to TNP phone

codec select the preferred codec to be used for SIP phone

cor Class of Restriction on dial-peer for this dn

description Define description for SIP phone

dialplan Associate a dialplan

dnd Turn on DND feature

dtmf-relay Transport DTMF digits across IP link

exit Exit from voice register pool configuration mode

fastdial Define ip-phone fastdial number

id define phone or device id

incoming Incoming called number

keep-conference Enable the conference when initiator drop-off

no Negate a command or set its defaults

number Define E.164 telephone number

preference Configure the preference for the voip dial-peers to be

created

presence enable call list feature

proxy Define SIP proxy for this pool

reset reset SIP phone

restart restart the SIP phone

session-transport Define the transport type to TNP phone

speed-dial Define ip-phone speed-dial number

template template tag used for SIP phone

type Define sip-phone type

username define username for authenticate

vad Enable vad on dial-peer and phone

voice-class Set voice class parameters



I'm using an IP-to-IP GW images, however it should not make any difference. Also other people can register 3rd party phone to CCME.

We should find out why "username" is not valid under "voice register pool" for you.

sandeep pokhriyal Mon, 04/16/2007 - 12:09

even i changed the ios to different version


still i am only getting half of these options.

dont kn yy.

Paolo Bevilacqua Mon, 04/16/2007 - 13:07

Strange. Do you have ?


voice service voip

allow-connections sip to sip

sip

registrar server



sandeep pokhriyal Mon, 04/16/2007 - 23:12


Router(config)#voice register pool 17

Router(config-register-pool)#?

voice register pool configuration commands:

after-hour After-hours call blocking

alias Associate alias pattern

application Define application

call-forward Define E.164 telephone number for call forward

codec select the preferred codec to be used for SIP phone

cor Class of Restriction on dial-peer for this dn

dtmf-relay Transport DTMF digits across IP link

exit Exit from voice register pool configuration mode

id define phone or device id

incoming Incoming called number

no Negate a command or set its defaults

number Define E.164 telephone number

preference Configure the preference for the voip dial-peers to be

created

proxy Define SIP proxy for this pool

translate-outgoing Translation rule

vad Enable vad on dial-peer and phone




and i have changed the ios also to this one:-


c2800nm-advipservicesk9-mz.124-11.T1.bin


still m not able to get commands as posted by you.

Paolo Bevilacqua Tue, 04/17/2007 - 04:22

Hi,


this reduced set of commands is the one typical of older IOS versions. It is like the router is not actually running the images you mentioned. Can you do a "show version", "show flash" please ?

sandeep pokhriyal Tue, 04/17/2007 - 12:38

hi,

this is the router ios i have got from show version.

also its the only ios in router otherwise it wont comeup.

Paolo Bevilacqua Tue, 04/17/2007 - 13:19

Can you don show telephony-service and paste it here ? I don't know how to explain this behavoir of not having the features running the correct image. Can you you check if you have any boot statement in config, perhaps an old image is somewhat booted.

sandeep pokhriyal Tue, 04/17/2007 - 22:49

hi,

the show telephony-service is showing version 4.1

also i changed the ios to latest what i found on cisco. also i run this command.

"boot system flash" for this image.

these are the files in flash.


Router#sh flas

2 1826 Aug 15 2006 23:05:30 +00:00 sdmconfig-28xx.cfg

3 4734464 Aug 15 2006 23:05:56 +00:00 sdm.tar

4 833024 Aug 15 2006 23:06:14 +00:00 es.tar

5 1052160 Aug 15 2006 23:06:36 +00:00 common.tar

6 1038 Aug 15 2006 23:06:52 +00:00 home.shtml

7 102400 Aug 15 2006 23:07:10 +00:00 home.tar

8 491213 Aug 15 2006 23:07:30 +00:00 128MB.sdf

9 1684577 Aug 15 2006 23:07:58 +00:00 securedesktop-ios-3.1.1.27-k9.pkg

10 398305 Aug 15 2006 23:08:20 +00:00 sslclient-win-1.1.0.154.pkg

11 36282900 Apr 17 2007 08:08:28 +00:00 c2800nm-advipservicesk9-mz.124-13a.bi

n


sandeep pokhriyal Wed, 04/18/2007 - 01:23

can u tell me which ios you are running or u can suggest me some. i will try to upload new image.

Paolo Bevilacqua Wed, 04/18/2007 - 02:30

Hi,


There is no 12.4T image in the flash. Insteas, there is a 12.4 non T image, that when booted would produce the results you are saying.


If there is one and only image in the flash, it will boot without need for "boot commands". Also if you cold just capture the whole boot process from console that would help.



sandeep pokhriyal Wed, 04/18/2007 - 03:27

hi,

as i mentioned i changed software again ..

if u check above mail then u will find tht i was using the image with "t".

with same result.

let me check with a newer release with 124t also and i will get back to you.


thx


a-zucchini Thu, 04/19/2007 - 01:36

with this version "c2801-spservicesk9-mz.124-11.T1.bin" it's working properly


a-zucchini Wed, 04/18/2007 - 00:29

hi

I'm trying to register a 3th party sip phone to may cme ver 4.1 ios ver "c2801-adventerprisek9-mz.124-13a.bin", but there isn't "voice register...." command can you help me ?

sandeep pokhriyal Wed, 04/18/2007 - 01:22

hi,


we are also troubleshooting the same issue.

will get back to you once done also u can check our posts.



Paolo Bevilacqua Wed, 04/18/2007 - 02:32

Hi,


You need a more recent version of 12.4T, note that with the IOS you mentioned you do not have CME 4.1 but more likely 3.4.


Actions

This Discussion