MPLS implementation in a LAN

platignum · ‎04-15-2007

Hi everyone,

I have been researching MPLS for a few days now with the intention of setting up a network to test MPLS operations using 2651xm routers and 2950 switches.

Presently Iam simply gathering general information before I start the project.

If anyone has had any experience of a similar setup or just MPLS in general I would be grateful for your comments.

I would also appreciate any links to informational sites or case studies that you have found.

One of my main aims here is to test VLAN operations in a LAN usng MPLS.

All comments and or suggestions will be gratefully accepted.

Thanks

Janet

fmeetz · ‎04-20-2007

Try:

http://www.cisco.com/en/US/tech/tk436/tk891/technologies_q_and_a_item09186a00801ed3bf.shtml

http://www.cisco.com/en/US/tech/tk436/tk428/tsd_technology_support_protocol_home.html

platignum · ‎04-21-2007

Thanks a million.

The documentation you provided proved to be very useful in aiding my understanding, which led me to http://www.juniper.net/techpubs/software/erx/junose61/swconfig-link/html/bridged-ethernet-config5.html

Just when I was beginning to think there was no light at the end of the tunnel...........

Cheers

Janet