cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
271
Views
0
Helpful
2
Replies

CME-Unity integartion, translation the fwd number

cjrchoi11
Level 1
Level 1

I want to accomplish the following.

1. somebody dial 3931

2. CFB/CFN=forward to Unity Call handler CH_Test1

3. Press 1, transfer to hunt group '1402'

4. If nobody answer by the hunt group member, direct to '3931's voice mail

5. From '3931' IP phone, should be able to access her personal voice mail

I cannot translate the calling ID (fwd number) to kick the Unity call handler. please guide me how to,

CME

===

!

voice translation-rule 1

...

rule 7 /^1402/ /3931/

!

voice translation-profile VM

translate redirect-called 1

!

ephone-dn 1

number 1001 (UNITY PILOT number)

call-forward busy 1002

call-forward noan 1002 timeout 12

translation-profile outgoing VM

!

ephone-dn 100 dual-line

number 3931 secondary 6049981231

call-forward busy 1403

call-forward noan 1403 timeout 12

!

ephone-dn 101

number 1403

call-forward all 1001

!

ephone-hunt 11 sequential

pilot 1402

list 3931, 3956, 3936

final 1001

!

UNITY

=====

-Subscriber as name 'Test1' and extension '3931'

-Call handler as name 'CH_Test1'

-Call routing(forwarded), fwd=1403, transfer to CH_Test1

Thanks in advance,

2 Replies 2

eschulz
Cisco Employee
Cisco Employee

I'm not entirely sure I follow your call flow but I _think_ the problem you are trying to resolve is in step 4. When the call forwards back to Unity, I'm guessing the redirecting number shows up as 1402 and you want to route this to the greeting for Test1 subscriber. Since Test1 already has extension 3931, you could add 1402 as an alternate extension. With this, the default Attempt Forward routing rule in Unity should send calls with redirecting number or 3931 or 1402 to the greeting from Test1.

Does that make sense? Or have I missed your issue entirely?

-Eric

Thanks Eric,

Actually, step4 is okay by rule 7 in the translation rule but my problem is Step2. I want to associate CH_Test1 to 1403 by manipulating the forwarding ID. that's why I configured CFB/CFN to 1403 instead direct to 1001.

Advise please,

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: