Error messages in 2651XM GW, cause outbound call failure, reboot fix it

Unanswered Question
Apr 16th, 2007
User Badges:

Cisco 2651XM as Gateway, it keep posting these error message and after a period of time, it cause outbound call failure.

Reboot fix it but there're still error messages...

How to fix it? It's IOS bug or hardware issue? How to identify?

Cisco IOS Software, C2600 Software (C2600-IPVOICE-M), Version 12.3(8)T10, RELEASE SOFTWARE (fc2)

Technical Support:

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Wed 03-Aug-05 20:45 by hqluong

ROM: System Bootstrap, Version 12.2(7r) [cmong 7r], RELEASE SOFTWARE (fc1)

cpchn1-g1 uptime is 6 hours, 56 minutes

System returned to ROM by reload at 03:52:44 NZST Tue Apr 17 2007

System restarted at 03:56:27 NZST Tue Apr 17 2007

System image file is "flash:c2600-ipvoice-mz.123-8.T10.bin"

Cisco 2651XM (MPC860P) processor (revision 0x100) with 118784K/12288K bytes of memory.

Processor board ID JAE072000AJ (1555074759)

M860 processor: part number 5, mask 2

2 FastEthernet interfaces

62 Serial interfaces

2 Channelized E1/PRI ports

32K bytes of NVRAM.

32768K bytes of processor board System flash (Read/Write)

See attach detail error messages

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion