one way voice communication problem

Unanswered Question
Apr 17th, 2007

Hi,

We are trying to configure a sip gateway with the below configuration. The router is installed with 4 fxo ports which i am connecting to a pstn line with the config as below.

dial-peer voice 10 pots

destination pattern 9t

port 0/0/0

forward digits all

When i dial any outside number through sip soft phone ,I am facing one way voice issue.

There is no sip servers as such in the network.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Aaron Harrison Tue, 04/17/2007 - 13:26

Hi

Check you have 'IP routing' enabled globally.

Regards

Aaron

Please rate helpful posts...

ngss Thu, 04/19/2007 - 00:04

Hi,

When you say there is not sip servers in the network, then how do you intiate the call?

Which sip softphone are you using?

At you sip phone, what do you configure for sip proxy?

I had done test before, basically you need a dial-peer voip using sipv2 point to your sip softphone

Thanks

SS

Actions

This Discussion