Cisco 7206 T1 IMA card

gideon1331 · ‎04-17-2007

I recently came into posession of a Cisco 7200 Series router, which I will be using to upgrade the network of a local non-profit. It came with various cards installed, including a T1 IMA 8-port card (model PA-A3-8T1IMA). Whenever I power on the router it says:

%OIR-3-SEATED: Insert/removal failed (slot x), check card seating.

It does this no matter what slot the card is plugged into. Does this mean that the card is toast? Or do I perhaps need to update something for it to work properly.

spremkumar · ‎04-18-2007

Hi

have you tried reseating the card onto the slot again which is mentioned in this error message ?

or else switch the box off and make sure all the modules are installed properly on the respective slots to avoid any future failures or error messages..

regds

gideon1331 · ‎04-19-2007

I have tried putting the card into any one of the six slots, both by itself and with other cards installed to no avail.