ariela Tue, 04/17/2007 - 16:05

Hello,

please try this:

username test nopassword autocommand telnet 10.30.4.5 /source vlan2

Let me know

Regards

Andrea

Paolo Bevilacqua Wed, 04/18/2007 - 09:21

12.4XJ as of today is only 12.4(11)XJ1 or XJ2.

Also tried with 12.4(11)T, same result.

Does it work for you ?

ariela Wed, 04/18/2007 - 09:59

well,

I've you already tried with:

username test nopassword autocommand telnet 10.30.4.5

?

Regards

Andrea

Paolo Bevilacqua Wed, 04/18/2007 - 10:08

Yes as it told you before ...

Without autocommand is command not valid!

Does it work for you ?

sundar.palaniappan Wed, 04/18/2007 - 10:17

Paolo,

I quickly tested your setup in my lab and it works fine. I don't know if there's a 'additional blank space' or 'space missing' in your autocommand syntax. Try removing the config and reentering it.

username test nopassword

username test autocommand telnet 172.30.1.11 /source loopback123

!

!

!

!

R2#172.30.1.12

Trying 172.30.1.12 ... Open

User Access Verification

Username: test

Trying 172.30.1.11 ... Open

Password required, but none set

[Connection to 172.30.1.11 closed by foreign host]

[Connection to 172.30.1.12 closed by foreign host]

HTH

Sundar

Actions

This Discussion