Translation pattern to convert number to pilot number

Answered Question
Apr 18th, 2007
User Badges:

I would appreciate some help in suitable method of translating a published number for a group XXXXXXX9640 and would like this translated to a ephone-hunt group pilot number (i.e. 5002), can anyone suggest the best method?

Correct Answer by Chris Deren about 10 years 1 month ago

Use either translation rule or num-exp. You did not specify how many digits you are getting from telco. For the following example lets assume it's 4.


voice translatio-rule 1

rule 1 /^9640/ /5002/

voice translation-profile 1

tranlsate called 1


dial-peer voice 1 pots

incoming called number 9640

translation-profile incoming 1


you can also apply the translation profile to voice-port.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml


num-exp is slighly easier all you would need to do is:


num-exp 9640 5002


HTH, please rate helpful posts!


Chris


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
Loading.
paolo bevilacqua Wed, 04/18/2007 - 03:57
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


you don't even need to translate, but if you have DID, likely you are translating already.


Eg:


ephone-hunt 1 sequential

pilot 5002 secondary xxxxxx9640


If were translating already on incoming, leaving the DID portion only, that would be:


pilot 5002 secondary 9640.


Hope this helps, please rate post if it does


Correct Answer
Chris Deren Wed, 04/18/2007 - 03:59
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,
  • Cisco Designated VIP,

    2017 IP Telephony, Contact Center, Unified Communications

Use either translation rule or num-exp. You did not specify how many digits you are getting from telco. For the following example lets assume it's 4.


voice translatio-rule 1

rule 1 /^9640/ /5002/

voice translation-profile 1

tranlsate called 1


dial-peer voice 1 pots

incoming called number 9640

translation-profile incoming 1


you can also apply the translation profile to voice-port.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml


num-exp is slighly easier all you would need to do is:


num-exp 9640 5002


HTH, please rate helpful posts!


Chris


lfulgenzi Tue, 05/15/2007 - 13:50
User Badges:
  • Silver, 250 points or more

Thanks Chris. This link helped.


I had seen it before and thought to myself, when would I ever need the 'number slice' feature....well, I just found one!


Thanks again.


Actions

This Discussion