04-18-2007 05:07 AM - edited 03-05-2019 03:31 PM
Does the WS-X6148A-GE-TX module for the 6500 have any IOS requirements? I am having trouble with one showing up as unknown and wanted to verify requirements but couldn't find exactly what I was looking for.
Solved! Go to Solution.
04-18-2007 06:06 AM
Hi
Yes you will need 12.2(18)SXF as a minimum.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2563113
HTH
Jon
04-18-2007 06:06 AM
Hi
Yes you will need 12.2(18)SXF as a minimum.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm#wp2563113
HTH
Jon
04-18-2007 07:03 AM
Thank you. We will need to look into upgrading our memory for that.
07-09-2008 09:51 AM
BTW, I guess there is no 12.2(18)SXF for Sup1A so even Cisco declare you can use 6148A with Sup1A there is no IOS to support that in native mode.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: