cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
527
Views
0
Helpful
4
Replies

Monitor CPU Load/Menory/Temperature

alsayed
Level 1
Level 1

Hi Experts!

I have dome MRTG & I Created a cfg file VIA THIS COMMAND:

perl cfgmaker ALI@10.10.10.254 --global "WorkDir: c:\www\mrtg" --output mrtg.cfg

NOW Iwant to monitor the CPU The Temperature of the Access switches & CORE;WHAT The command should be to creat like this cfg for these issue

Regards

ALI

4 Replies 4

alsayed
Level 1
Level 1

Freinds!

any kind reply here!

regards

guruprasadr
Level 7
Level 7

HI,

Can you please post / attach the Configuration file of MRTG ie., CFG file.

Regards,

Guru Prasad R

hello Guru!

# Created by

# cfgmaker ali@10.10.10.254 --global "WorkDir: c:\www\mrtg" --output mrtg.cfg

### Global Config Options

# for UNIX

# WorkDir: /home/http/mrtg

RunAsDaemon: yes

Refresh: 300

# or for NT

# WorkDir: c:\mrtgdata

### Global Defaults

# to get bits instead of bytes and graphs growing to the right

# Options[_]: growright, bits

EnableIPv6: no

######################################################################

# System: Switch

# Description: Cisco Internetwork Operating System Software

# IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5)XU, RELEASE SOFTWARE (fc1)

# Copyright (c) 1986-2000 by cisco Systems, Inc.

# Compiled Mon 03-Apr-00 17:31 by swati

# Contact:

# Location:

######################################################################

### Interface 1 >> Descr: 'VLAN1' | Name: 'VL10' | Ip: '' | Eth: '' ###

Target[10.10.10.254_1]: 1:ISIR@10.10.10.254:

SetEnv[10.10.10.254_1]: MRTG_INT_IP="" MRTG_INT_DESCR="VLAN10"

MaxBytes[10.10.10.254_1]: 1250000

Title[10.10.10.254_1]: Traffic Analysis for SWITCH

PageTop[10.10.10.254_1]:

Traffic Analysis for SWITCH

System:
Switch in
Maintainer:
Description:
VLAN1
ifType:
ethernetCsmacd (6)
ifName:
VL1
Max Speed:
1250.0 kBytes/s

### Interface 2 >> Descr: 'FastEthernet0/1' | Name: 'Fa0/1' | Ip: '' | Eth: '00-02-b9-b8-c7-41' ###

### The following interface is commented out because:

### * it is operationally DOWN

#

# Target[10.10.10.254_2]: 2:ISIR@10.10.10.254:

# SetEnv[10.10.10.254_2]: MRTG_INT_IP="" MRTG_INT_DESCR="FastEthernet0/1"

# MaxBytes[10.10.10.254_2]: 75000000

# Title[10.10.10.254_2]: Traffic Analysis for 2 -- Switch

# PageTop[10.10.10.254_2]:

Traffic Analysis for 2 -- Switch

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

#

System:
Switch in
Maintainer:
Description:
FastEthernet0/1
ifType:
ethernetCsmacd (6)

HI alsayed,

Thanks for yor providing the Configuration. I have documentations for MRTG but its quiet difficult to understand & implement without any prior experience or guidance.

Can you please provide:

1.Complete MRTG Configuration file (Main file) for Windows / Unix

2.RRD Tool Integration

3.HTML Script for Webpage Display

4.Apache specifications for the Display.

Thanks in Advance for Help. You can remove your Company's Confidential.

Best Regards,

Guru Prasad R

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card