about 6704 module 10Ge

Unanswered Question
Apr 18th, 2007
User Badges:
  • Silver, 250 points or more

Hi folks,


just a question: with two 6704 4x10Ge modules could I create a 20 Gbit EtherChannel with two links on different modules?


I've tried, but one remains always in err-disable, and I don't understand why.


Any advice will be appreciated

Regards

Andrea

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
b.hsu Wed, 04/25/2007 - 05:10
User Badges:
  • Silver, 250 points or more

If you switch runs with Cisco IOS software, then use the following document to recover the port from errdisable state.

http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml


If you are using Cisco Catalyst OS for your switch, use this document,

http://www.cisco.com/en/US/tech/tk389/tk214/technologies_tech_note09186a0080093dcb.shtml


Actions

This Discussion