Unanswered Question
Apr 19th, 2007
User Badges:

Is this configuration correct for a data transfer from an E1 PRI


controller E1 1/0

framing NO-CRC4

pri-group timeslots 1-31



interface Serial1/0:15

ip address

no cdp enable

encapsulation ppp

dialer idle-timeout 119

dialer string xxxxxx

dialer-group 1

isdn switch-type primary-net5

isdn point-to-point-setup

ppp authentication chap pap callin

ppp chap hostname yyyyyyyy

ppp chap password zzzzzz


dialer-list 1 protocol ip permit

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Wilson Samuel Thu, 04/19/2007 - 10:33
User Badges:
  • Gold, 750 points or more
  • Community Spotlight Award,

    Mobile User, July 2015


One question, if you want the entire 30 Channels to be dialed in simultaneously to the same destination why not use it as a E-1 rather than E-1 PRI.

I mean what is the need of PRI, if you can manage the same show with Channelized E-1 or E-1.

Otherwise in this config, I guess it should be fine.


This Discussion