Good morning all,
Trying to come up with usage stats for an SSID that i'm phasing out(LEAP SSID). While I am using ciscoworks which fires off the same time each week to give me some general stats. Im looking for something more all around.
I have all my APs pointing to a single syslog box, however it doesn't presently record the SSID or VLAN. If i could get which VLAN the user was associated with, that would rock as well.
I am not talking about issuing a command to obtain them manually. I am asking for methods used to turn possibly a logging option on, which pertains to vlan/ssid of an association.
Its been a while, hope all is well with you! Maybe this Report would do the trick (or maybe I'm looping on too much coffee :)
Displaying a Per VLAN Client Report
Per VLAN Client Report
The identification number of the VLAN.
The name of the VLAN.
The radio interface name.
The unique identifier the client device uses to associate with the access point.
Client MAC Address
The MAC address of the client.
The name of the client.
Client IP Address
The IP address of the client.
The type of client associated to the access point.
The time the WLSE polled information from the device.
Hope this helps!