Loading Balacing on Router

Unanswered Question
Apr 19th, 2007

I have two links of internet coming from diferents TELCO companies. Can I dritibuted my traffic on these links using 70% of bandwith and 30%?

Witch protocol or feature my router must perform to reach that. What other ways i can do this?

Thank you

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Wilson Samuel Thu, 04/19/2007 - 10:57


There are a couple of ways to achieve the same, I'm listing some of them as below:-

1. Buy a Radware device and it will take all the burden and you neednt do anything.

2. Run BGP and manage the traffic with the help of a device from FCP

3. Run GLBP and that will help to an extent.



Wilson Samuel

Paolo Bevilacqua Mon, 04/23/2007 - 04:13

Actually there is no need for either BGP, PBR or radware to balance unequally, if you are suing NAT.

Just configure some selective supernet routes like /7

And that will make a pseudo-balancing to work. It is up to you to find the right set of destinations that attains your goal of 30% on one link.

Hope this helps, if it does please rate this post!


This Discussion