04-19-2007 11:45 AM - edited 03-18-2019 07:14 PM
I have CCME and I want to upgrade the "feature licens" from 24 phones to support 96 phons .
I need to know how can I double check the current licencs .
can any one advice me ?
04-19-2007 12:22 PM
Do the following:
conf t
telephony-service
max-ephones ?
After typing ?, you should (1-X) where X is the maximum phones the system will currently support.
Hope this helps. If so, please rate the post.
Brandon
04-19-2007 12:39 PM
04-19-2007 12:26 PM
Hi Yousif,
Just to add a note to Brandons great info. CME Licensing is Platform Specific. Have a look at the following;
Maximum Total IP Phones (Platform Specific)
Cisco 2801
24 IP Phones
Cisco 2811
36 IP Phones
Cisco 2821
48 IP Phones
Cisco 2851
96 IP Phones
Cisco 3825
168 IP Phones
Cisco 3845
240 IP Phones
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_installation_guide09186a00807aae21.html
Hope this helps!
Rob
Edit: Brandon, please keep in mind that I flunked Typing 10 (I can't keep up :)
rh
11-22-2007 02:01 PM
Hello
I have got the same problem.
If i Have a 2801, how i can get reister more than 24 phones?
Thanks
11-26-2007 09:49 AM
You cannot currently register more than 24 phones to a 2801.
Brandon
11-26-2007 09:55 AM
You can register 30. This is because the real limits are a little higher than the official ones.
11-26-2007 10:04 AM
Good point. However, I think you'll only get support for 24.
Brandon
09-30-2008 06:25 AM
Hi Rob,
The link is not happening, do you know where it's been moved by any chance please...?
best regards
Ajaz
09-30-2008 07:27 AM
Hey Ajaz,
Another broken link :(
The info is towards the bottom of the page;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm
Hope this helps!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide