I have PIX535 with ver 7.2.2
I would know is there any problem on static routes pointing to the same host but in different interfaces?
Group A workstations NAT to interface "DMZ1" with 172.16.1.x
Group B workstations NAT to interface "DMZ2" with 172.16.2.x
But these workstations going to the same host.
route DMZ1 ABC 255.255.255.255 172.16.1.1 1
route DMZ2 ABC 255.255.255.255 172.16.2.1 1
Is there any problem on this setting?
Thanks a lot in advance.