Cisco 827 NAT + Access server inside problem

Unanswered Question

I have a question about a NAT translation to a server in the inside network.

This command is added to de configuration:

ip nat inside source static tcp 3389 interface BVI1 3389

Is does not work to connect from the internet to de server on 3389 (RDP). I Have no accesslist on the interface`s.

If i use: sh ip nat translation then i see that inside global is natted to inside local

I hope that somebody can helping or can tell my how to debug this problem.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
spremkumar Thu, 04/19/2007 - 23:12


AFAIK its better to have and static ip on the bvi interface which can be then mapped to the inside address.

I don't think at present you will be able to do RDP without checking out the ip address recieved out on the bvi interface.

If you can get a static ip address assigned to DVI then you can redo the mapping accordingly.



This Discussion