04-20-2007 05:00 AM - edited 03-05-2019 03:34 PM
Got a cisco 831 and I need to know if this router is capable of doing the pppoe auth without having the ATM interface.
Currently my dsl modem is in bridge mode with a wrt54g doing the pppoe login/auth.
TIA
04-20-2007 11:30 AM
Sure, I do it with a 851. You need to use a dialer interface though.
HTH and please rate.
04-20-2007 12:21 PM
Thanks, Should my config look something like this:
vpdn enable
no vpdn logging
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer-group 2
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname
ppp chap password 12345
ppp pap sent-username password 12345
!
interface Ethernet 1
no shutdown
description connected to Internet
ip address x.x.x.x x.x.x.x
no keepalive
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet 0
no shutdown
description connected to Internal Switch
ip address x.x.x.x x.x.x.x
04-20-2007 12:24 PM
Mines a little different and that of course depends on your ISP, but it looks pretty good to me.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: