04-20-2007 05:00 AM - edited 03-05-2019 03:34 PM
Got a cisco 831 and I need to know if this router is capable of doing the pppoe auth without having the ATM interface.
Currently my dsl modem is in bridge mode with a wrt54g doing the pppoe login/auth.
TIA
04-20-2007 11:30 AM
Sure, I do it with a 851. You need to use a dialer interface though.
HTH and please rate.
04-20-2007 12:21 PM
Thanks, Should my config look something like this:
vpdn enable
no vpdn logging
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
interface Dialer 1
description connected to Internet
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer-group 2
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname
ppp chap password 12345
ppp pap sent-username password 12345
!
interface Ethernet 1
no shutdown
description connected to Internet
ip address x.x.x.x x.x.x.x
no keepalive
pppoe enable
pppoe-client dial-pool-number 1
!
interface Ethernet 0
no shutdown
description connected to Internal Switch
ip address x.x.x.x x.x.x.x
04-20-2007 12:24 PM
Mines a little different and that of course depends on your ISP, but it looks pretty good to me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide