Solved: IOS 9.x

opteronguy · ‎04-21-2007

I hava a pair of 2501 routers with IOS 9.14 on them. I'm used to the 12.x series of IOS and it's commands so I was wondering if there was somewhere that I could find the 9.x version of commands.

Thanks.

Joe Clarke · ‎04-21-2007

Wow, be careful not to touch those routers, or they may collapse into a pile of dust ;-). Here is the link to the 9.0 docs:

http://www.cisco.com/univercd/cc/td/doc/product/software/ssr90/index.htm

And this is a link to the consolidated list of IOS docs:

http://www.cisco.com/univercd/cc/td/doc/product/software/index.htm

View solution in original post

Joe Clarke · ‎04-21-2007

Wow, be careful not to touch those routers, or they may collapse into a pile of dust ;-). Here is the link to the 9.0 docs:

http://www.cisco.com/univercd/cc/td/doc/product/software/ssr90/index.htm

And this is a link to the consolidated list of IOS docs:

http://www.cisco.com/univercd/cc/td/doc/product/software/index.htm

opteronguy · ‎04-21-2007

You're the man. Thanks so much for posting these. I did some roaming around on the net but never got anything worth while.

As for the routers, they are pretty old, however they work for helping me study for my CCNA. Two of them are 9.x while the other is 12.2. Its been interesting trying to figure out the old commands (which in some cases make no sense to me) vs the new ones.

Thanks again!