Multiple Site to Site VPN

Answered Question
Apr 23rd, 2007

Hello. I have one central router and 52 client routers and i want those clients to connect to the central router with VPN. Any hints or how to's on configuring the clients and the server? Thanks in advance for any help.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
dominic.caron Mon, 04/23/2007 - 05:19

Hi,

Is communication needed between spokes or is it only hub-spoke.

spoke to spoke = DMVPN

hub to spoke = DMVPN or L2L or EZvpn

I would not go with L2L since you have 52 spoke and it's hell to manage.

The way I see this, it's between DMVPN and EZvpn. I prefer the DMVPN since it's realy easy to scale.

osmansmalik Mon, 04/23/2007 - 12:52

i want to use a cisco 2851 router as a VPN server and cisco 1800 series router as a client. We have over 100 sites which will use Cisco 1800/1700 series routers for VPN connections. Sometimes VPN sites will need to communicate to other VPn sites but i would like to set it up in such a way that they make a dynamic tunnel when they need to communicate and break the tunnel when the connection is closed instead of going to the 2851 router as the server. Basically it will be a Hub and spoke config but sometimes it will be spoke to spoke depending on the request.

Please advise the best way to do it.

Thanks,

Osman Malik

Actions

This Discussion