Hi I have a question for you...I have an edge router that is already permitting the subnet 18.104.22.168/24 in. I have a customer that wants us to NAT 2 of his IP address 10.6.158.212 and 225. I figured all I would need to do is
ip nat outside source static 10.6.158.212 22.214.171.124
ip nat outside source static
Add to the current access-list:
ip access-list standard permitssbroutes
am I thinking correctly?
thank you in advance
the config is right but do not forget the IP nat inside / IP nat outside on the incoming/outgoing interface, also you do not need any ACL in such NAT config, unless you use it to secure the traffic pass over the router.
Please rate helpful posts.