04-23-2007 07:05 AM - edited 03-05-2019 03:37 PM
I recently configured a Catalyst 3560G and noticed that the ip ssh commands were not available. So I downgraded from IOS ver c3560-ipservices-mz.122-25.SEE2 to c3560-ipservicesk9-mz.122-25.SEB4. After downgrading, the ssh commands were available but I get a error message when I do a reload. Any ideas:
Loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"...c3560-ipservicesk9-mz.122-25.SEB4.bin: no such device
Error loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin" uncompressed and installed, entry point: 0x3000
executing...
04-23-2007 09:42 AM
Please paste the output of " show flash:" " show bootvar ", if its there.It seems like the switch is unable to findout the file in the bootpath string, that's why it gave an error.
Please the config also.
-amit singh
04-23-2007 10:54 AM
Directory of flash:/
2 drwx 128 Mar 1 1993 16:12:06 -04:00 c3560-ipservices-mz.122-25.SEE2
406 -rwx 109 Feb 28 1993 20:08:16 -04:00 info
407 -rwx 736 Feb 28 1993 20:01:27 -04:00 vlan.dat
3 -rwx 6056 Feb 28 1993 20:03:23 -04:00 config.text
409 drwx 0 Mar 1 1993 16:02:35 -04:00 test
410 -rwx 3422 Feb 28 1993 22:06:03 -04:00 backup-config
412 -rwx 46 Feb 28 1993 20:03:23 -04:00 private-config.text
413 -rwx 6971648 Feb 28 1993 20:35:54 -04:00 c3560-ipservicesk9-mz.122-25.SEB4.bin
411 -rwx 1048 Feb 28 1993 20:03:23 -04:00 multiple-fs
show boot
BOOT path-list : flash
BOOTHLPR path-list : c3560-ipservicesk9-mz.122-25.SEB4.bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : no
HELPER path-list :
Auto upgrade : yes
04-23-2007 11:05 AM
What happens when you try
Boot system flash:c3560-ipservicesk9-mz.122-25.SEB4.bin from the rommon mode
Narayan
04-23-2007 11:50 AM
switch: boot c3560-ipservicesk9-mz.122-25.SEB4.bin
Loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"...c3560-ipservicesk9-mz.122-25.SEB4.bin: no such device
Error loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed..
04-23-2007 08:31 PM
Do this:
Config t
switch(config)# boot system flash:c3560-ipservicesk9-mz.122-25.SEB4.bin
Ctrl+Z
Wr mem
Reload...
Check if you still get that error.Paste the booting sequence..
-amit singh
04-25-2007 05:14 AM
Still get error:
AUCORESW1-STANDBY(config)#boot system flash:c3560-ipservicesk9-mz.122-25.SEB4.$
AUCORESW1-STANDBY(config)#^Z
AUCORESW1-STANDBY#wr m
*Mar 2 12:37:16.479: %SYS-5-CONFIG_I: Configured from console by consoleem
Building configuration...
[OK]
AUCORESW1-STANDBY#reload
Proceed with reload? [confirm]
*Mar 2 12:37:23.534: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Base ethernet MAC Address: 00:19:e8:16:a1:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 405 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 8709632
flashfs[0]: Bytes available: 23804416
flashfs[0]: flashfs fsck took 7 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"...c3560-ipservicesk9-mz.122-25.SEB4.bin: no such device
Error loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(25)SEB4, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 30-Aug-05 17:56 by yenanh
Image text-base: 0x00003000, data-base: 0x00FC1DF8
Initializing flashfs...
flashfs[1]: 405 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32514048
flashfs[1]: Bytes used: 8709632
flashfs[1]: Bytes available: 23804416
flashfs[1]: flashfs fsck took 1 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
front_end/ (directory)
extracting front_end/fe_type_1 (34696 bytes)
extracting front_end/front_end_ucode_info (43 bytes)
extracting ucode_info (76 bytes)
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC PortASIC interface Loopback Tests : Begin
POST: CPU MIC PortASIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Waiting for Port download...Complete
04-23-2007 09:46 PM
try loading the file again via Xmodem
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/scg/swtrbl.htm#wp1099467
Narayan
04-23-2007 09:54 PM
Narayan,
I think the boot path was not set for the image, that's why it wasnt booting properly. Check the output of Show boot , there is not boot path list defined. I think setting the boot path using " boot system flash " command should solve the issue here. There is not need to upload the image again using Xmodem.
-amit singh
04-23-2007 10:23 PM
Can we use this command under the Rommon?
04-25-2007 05:19 AM
AUCORESW1-STANDBY(config)#boot system flash
AUCORESW1-STANDBY(config)#^Z
AUCORESW1-STANDBY#wr m
*Feb 28 20:28:35.762: %SYS-5-CONFIG_I: Configured from console by consoleem
Building configuration...
[OK]
AUCORESW1-STANDBY#reload
Proceed with reload? [confirm]
*Feb 28 20:28:42.096: %SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.
Base ethernet MAC Address: 00:19:e8:16:a1:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 405 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 8709632
flashfs[0]: Bytes available: 23804416
flashfs[0]: flashfs fsck took 7 seconds.
...done Initializing Flash.
Boot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"...c3560-ipservicesk9-mz.122-25.SEB4.bin: no such device
Error loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3560-ipservicesk9-mz.122-25.SEB4.bin" uncompressed and installed, entry point: 0x3000
executing...
04-25-2007 05:15 AM
I've tried that several times already.
04-25-2007 05:16 AM
I've tried that several times already.
04-25-2007 05:38 AM
Even though you are having a 3560, it sysmptoms indicate that u r hitting the possible bug CSCef23660
Can you try uploading an IOS with a different major version and check
Narayan
04-25-2007 08:03 AM
I tried c3560-ipservicesk9-mz.122-25.SEE3.bin and get:
oot Sector Filesystem (bs) installed, fsid: 3
done.
Loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"...c3560-ipservicesk9-mz.122-25.SEB4.bin: no such device
Error loading "c3560-ipservicesk9-mz.122-25.SEB4.bin"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/c3560-ipservicesk9-mz.122-25.SEE3.bin"...@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
File "flash:/c3560-ipservicesk9-mz.122-25.SEE3.bin" uncompressed and installed, entry point: 0x3000
executing...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: