Hide the DDI number to other Party

Unanswered Question
Apr 23rd, 2007
User Badges:

Hi All,

Just wanna ask on how to configure in call manager such that when my Client make outgoing calls to the Other party, his/her DDI number will appear "unknown number/or private number", so that my client cannot be traced from the other party.

Thank you for your future response.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (4 ratings)
thisisshanky Tue, 04/24/2007 - 07:50
User Badges:
  • Purple, 4500 points or more

Create a route pattern such as (this is for local calls)


Set calling line ID presentation to Restricted.

Set Discard digits to Predot. (Assuming its an MGCP gateway).

When user's dial *67 in front of the local number to dial, caller id will be passed, but the presentation bit is set to restricted, so the telco will mask the number.



PS: please remember to rate posts!

paolo bevilacqua Tue, 04/24/2007 - 07:54
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

I've rated the post. I knew how to do that at GW level or CCME, but had no idea for CCM / MGCP.

Thanks shanky!

thisisshanky Tue, 04/24/2007 - 07:56
User Badges:
  • Purple, 4500 points or more

Thanks for the rating Paul. That was too fast!!

johnnylingo Thu, 06/07/2007 - 08:47
User Badges:
  • Bronze, 100 points or more

It's also possible to do this with translation patterns and route filters. You will still need to do one for each regular route pattern, but it still managed to save me some typing and keep my number of route patterns down to a reasonable number.

Simply have a translation pattern of *67.9@, and copy the partition, route filter, and calling search space from the corresponding route pattern. Set Calling Line ID to restricted, and discard the PreDot.


This Discussion