CallManager 5.1 BLF

Justin Pascal · ‎04-23-2007

Hello experts:

I have the following:

2 7941

7941 Number 1 (1002) has 1 DN and BLF for

7941 Number 2 (1003)

When 7941 Number 2, goes OFFHOOK (1003)

BOTH LEDS in -7941 Number 1- turn RED.

Is that normal? Although I only configure BLF for 7941 Number 1 button 2?

Or only BLF led should turn on RED?

Thank you

thisisshanky · ‎04-23-2007

Unless you made a typo in the DNs and they are a shared DN on both 7941s, only the BLF led should turn red.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

benny · ‎06-05-2007

HI all...

I'm also getting the same symptoms... Both of the lines turns red.

I'm using CCM5.1

thisisshanky · ‎06-05-2007

What version of CM 5.1 are you running (Like 5.1.2000.2) etc..

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

benny · ‎06-05-2007

Hi There..

Believe it's either 2000.1 or 2000.2

But just to check.. So it's more like a version issue? Can i check the version that u got it workign fine with?

thisisshanky · ‎06-05-2007

I have a 2000.2 which is pretty old version compared to the patch level CM 5.1 is right now at. It works just fine on mine.

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

benny · ‎06-05-2007

Hi There..

Sorry. made a mistake.. the one which problem is 5.1.1-3000-5